far мод для nier automata
¶ Introduction
Special K currently has a limited feature set for the Microsoft Store version, as some features mentioned on this page is unavailable.
Special K features NieR: Automata specific tweaks and features (collectively known as FAR) created by Kaldaien with contributions from various individuals. For years these tweaks were essential to fix various issues the Steam version of the game suffered from, and many of these features and fixes made their way into the game officially following an update to the game released by Square Enix on July 15, 2021.
With the current state of the game Special K (FAR) is no longer as essential though it still features improvements to the latest version of the game that some may find beneficial:
Enables much faster loading times.
Can improve the frame pacing of the game and eliminate micro stuttering.
Decrease the global illumination below that of the lowest setting of the game for a major performance improvement.
As well as various other minor fixes and features that improves the overall rendering pipeline and latency, such as Nvidia Reflex integration.
¶ Update FAQ
How to migrate from the old FAR to the latest release?
See the below Installation section.
How do I get improved performance on lower-end devices?
Special K can decrease or disable global illumination beyond what the game exposes, see the relevant section below.
How to install ReShade with Special K?
See the separate ReShade page.
Does the HD Texture Mod still work?
Yes, rename the folder FAR_Res to SK_Res
Does the LOD Mod still work?
Yes, use the new Automata LodMod mod that fixes both ambient occlusion appearing through walls as well as LOD pop-ins.
Is there a fix for the Ambient Occlusion graphical glitches?
Yes, use the new Automata LodMod mod that fixes both ambient occlusion appearing through walls as well as LOD pop-ins.
Where can I go for other mods?
More mods can be found over on NieR:Modding (Website, Discord) or Nexus Mods.
¶ Known Issues
There is only experimental >60 FPS support using the latest Special K version.
3DMigoto is not compatible with HDR.
The Fullscreen mode might not work alongside Special K, which can be fixed in either of the following ways:
Configure the game to Borderless mode, which is functionally identical.
Open Special K’s in-game UI, expand the SwapChain Management section, and disable Waitable SwapChain.
For existing users of Special K the game might not launch with the latest version of SK.
This can be fixed by browsing to \Documents\My Mods\SpecialK and deleting the Global folder.
Infinite loading screens is usually caused by outdated textures, such as 2B dress textures, incompatible with the new version of the game. Please remove any such textures.
Special K currently has a limited featureset for the Microsoft Store version following its patch. This will eventually be fixed with the featureset of Special K unifying across both versions.
¶ Installation
The legacy standalone version of FAR is no longer compatible with the game, and the game will fail to launch if those files are left in the game folder so they need to be manually removed. Please Uninstall FAR v 0.7.0.23 or older before proceeding further.
Special K (which includes the FAR plugin) can be installed for the game, either through a Global (system-wide) or Local (game-specific) install. The legacy standalone version of FAR is known as a “local Special K install”, so if you only want Special K for NieR: Automata and no other games, please follow those instructions.
The best compatible version of Special K is the test version of Special K available from the forum.
See the section below for how to install Special K for the Microsoft Store version.
¶ Installation (Microsoft Store)
Special K currently has a limited feature set for the Microsoft Store version, as some features mentioned on this page is unavailable.
The global injector of Special K can be used to inject the mod into the game:
Install the global injector of Special K.
Launch SKIF.exe and open the Options tab. In the Whitelist area, type in NieRAutomataPC and then click on the Save Changes button at the bottom.
Go to the Global Injection tab, select Special K, and click on Start Service to start the global injector.
Launch the game. If everything works properly Special K’s GUI should appear and you can hit Ctrl + ⇧ Shift + ← Backspace to access its in-game control panel.
¶ Texture Mods (incl. Resorep)
Special K supports injecting custom textures into the game, allowing the use of third-party textures mods.
Find a texture mod you would like to use.
Press Ctrl + ⇧ Shift + ← Backspace to open the control panel of Special K.
In the file menu bar of the control panel, click on File and then Initialize Texture Mods.
Now click on File again, and select Browse Texture Assets and click on Injectable Textures.
The texture inject folder should open in a regular File Explorer window on your computer. Now close down the game.
In the texture inject folder that was opened, create a new subfolder with a name of your choice.
This is primarily for your own benefit. If you want you can also just use the base NieRAutomata.exe folder without any subfolders, however this will make it impossible to separate textures between mods.
Example: a subfolder called “2B” which contains all 2B related textures.
Move the texture files of the mod into the newly created folder.
Launch the game and enjoy your texture mod.
¶ Faster Load Times
As a result of the way the FPS unlocker feature works in the updated Steam version, it has a beneficial side effect of speeding up loading times as the loading animation itself is no longer limited to 60 FPS. Special K includes a toggle that automatically disables both the built-in as well as Special K’s own FPS limiter during loading screens to allow these to pass by much quicker than otherwise. This can bring the loading times of the game down from
Press Ctrl + ⇧ Shift + ← Backspace to open the control panel of Special K.
Expand the NieR: Automata > Framerate subsection. Click on the box to the left of Fast Load Mode to enable faster loading times.
Loading times should now be quicker as the time is not as limited by the animation speed itself any longer. In general, the faster the frame rate you can reach during loading times the faster loading will become.
¶ Global Illumination
Global illumination (indirect light bouncing) is a massive performance hog of the game that both the game and Special K allows changing, though in different ways.
It is currently unknown if there is a direct correlation between official in-game quality levels and those of Special K’s override, however as far as can be determined based on visual impact and performance gains, the in-game quality levels seems to stretch themselves from SK’s Ultra level (assumed to be the same as the in-game High level), to SK’s High level (assumed to be approximately the in-game Medium level), and a separate quality level between that of SK’s High and SK’s Medium that would correlate to the in-game Low quality level. For a visual comparison between quality levels, see Visual Impact.
The game does not seem to expose lower quality levels of global illumination, such as SK’s Medium, Low, or Off, where the main performance gains can be found for lower-end devices.
¶ Native
Open the Settings screen of the game.
Locate the Global illumination toggle.
Change the value accordingly.
High seems to correlate to the default quality level of older versions of the game, and is called Ultra in Special K’s override.
Medium seems to correlate to approximately the same quality level as the High override in Special K.
Low seems to correlate to approximately a quality level between that of the High and Medium override in Special K.
The game does not have any native quality levels that directly correlates to Special K’s Medium, Low, or Off overrides.
If the performance gains are not enough, try using the Special K method to decrease the global illumination even further.
¶ Special K
The game’s own global illumination toggle on the Settings page must be set to High for Special K’s override to have an effect.
Press Ctrl + ⇧ Shift + ← Backspace to open the control panel of Special K.
Expand the NieR: Automata > Lighting subsection.
Adjust the Global Illumination Quality for a performance boost.
¶ Visual Impact
The following screenshots showcase the effect global illumination has on objects in the environment by adjusting the Global Illumination Quality override in Special K. Note that this override only has an effect when the game’s own setting is set to High.
| Quality Level | Bright Environment | Dark Environment | Workgroups |
|---|---|---|---|
| SK Ultra [ |
High]
[
Medium]
[Low]
[N/A]
[N/A]
[N/A]
¶ High Dynamic Range (HDR)
Special K enables users to replace the default HDR implementation of the game with a custom one with more options available that some users might prefer. This is recommended only for advanced users.
In the display settings of Windows, ensure that Use HDR is enabled for the HDR compatible monitor.
Launch and close the game once to allow the Special K config file to be created.
Find and change the parameter HideHDRSupport=false to HideHDRSupport=true
Press Ctrl + ⇧ Shift + ← Backspace to open the control panel of Special K.
Expand the Widgets section. Click on the box to the left of HDR Display to enable the HDR calibration widget in the top right corner of the screen.
In the HDR calibration widget in the top right corner, enable the scRGB HDR option.
Restart the game to allow the change to take effect.
Load a save file and then use the HDR calibration widget to adjust the HDR experience.
When you are finished, uncheck the HDR Display under the Widgets section to hide the widget again.
¶ Remove 60 FPS Cap
The FPS unlocker option of Special K is experimental. The Remove 60 FPS Cap option in Special K is currently used to allow Special K to replace the built-in FPS limiter of the game with its own, as this may result in a smoother or more stable frame pacing. Going above 60 FPS will result in some aspects of the gameplay being sped up.
Press Ctrl + ⇧ Shift + ← Backspace to open the control panel of Special K.
Expand the NieR: Automata > Framerate subsection. Click on the box to the left of Remove 60 FPS Cap to enable the unlock.
The in-game FPS limiter is now removed and replaced with Special K’s much improved frame rate limiter.
¶ Uninstall FAR v 0.7.0.23 or older
The legacy version of FAR (v 0.7.0.23) is not compatible with the new updated Steam version, and the game will fail to launch if left in the game folder. The files related to FAR needs to be removed manually from the game folder, so please remove them from the game folder. This is most easily done by removing any and all files that is not shown in the below image.
These are the files and folders related to older versions of FAR:
| Name | Type | Comment |
|---|---|---|
| dinput8 | Files | Remove any file with dinput8 in its name. These are the main components of FAR. |
| FAR.ini | File | Holds NieR: Automata tweaks config. |
| d3d11_shaders.ini | File | Holds outdated shader config for the outdated custom ReShade of FAR. |
| Version | Folder | Holds non-functioning auto-updater version data. |
| logs | Folder | Holds FAR diagnostics logs. |
| ReShade | Files/Folder | Remove any file or folder with ReShade in its name is related to FAR’s outdated custom version of ReShade. |
¶ Uninstall
Removing Special K from NieR: Automata depends on the method that was used to install it:
For local (game-specific) installs for the Steam version, simply removing Special K’s DLL file from the game folder is enough. The DLL file is usually called dxgi.dll or dinput8.dll.
For global (system-wide) installs for both the Steam version and the Microsoft Store version, stopping the global injector through the Special K Injection Frontend (SKIF) is enough to stop Special K from affecting the game. If the Special K installer was used to install SK, the global injector can be uninstalled through the regular Apps & Features list of Windows.
NieR: Automata «FAR (мод) v0.5.7.4 для получения играбельного FPS на слабых видеокартах уровня GTX460\GTX650 и выше»
Описание: данный мод\конфиг позволяет поднять FPS в зависимости от графической сложности локаций и врагов на 10-20 кадров в секунду. На скриншотах, которые сделаны на видеокарте Nvidia GTX650 1GB\1280×720\настройки «низко», видно что в самых сложных сценах FPS будет проседать до 17 и часто плавать между 20-26 кадров. В сценах со слабой нагрузкой на видеокарту вы будете иметь на подобной видеокарте 30-40FPS на разрешении 1280х720. Это то что получилось у меня, у вас может быть другой результат. Для комфортной игры рекомендую использовать 1280х720 в окне (если полно-экранный режим будет вызывать дискомфорт от слабого качества картинки).
Eg5TGOr6iJg Видео-обзор и инструкция (ENG)
Требования:
Инструкция:
Toggle Framerate Counter Ctrl + Alt + Shift + F
Toggle Clock / Version Ctrl + Alt + Shift + T
Toggle GPU Monitor Ctrl + Alt + Shift + G
Toggle CPU Monitor Ctrl + Alt + Shift + C
Toggle Memory Monitor Ctrl + Alt + Shift + M
Toggle I/O Monitor Ctrl + Alt + Shift + I
Toggle Disk Monitor Ctrl + Alt + Shift + D
Toggle Page File Monitor Ctrl + Alt + Shift + P
Toggle D3D11 Shader Analytics Ctrl + Alt + Shift + R
Киногад
Все, что вы хотели знать о кино…
FAR (мод для Nier:Automata)
Если у вас более-менее современная декстопная или дискретная видеокарта, а игра неплохо идет в 1280х720, то можно смело использовать программу FAR для улучшения производительности.
Все, что нужно, это распаковать архив в папку с игрой и запустить ее. Если увидите желтые надписи на экране, это означает, что все работает. Комбинация Ctrl + Shift + 0 вызывает специальное меню:
Там тогда надо найти опцию «Global Illumination Quality» и поставьте такое значение, которое вас удовлетворит. Стоит заметить, что эта опция снижает качество теней и освещения, но это оправданная жертва ради скорости.
Кроме всего прочего, этот мод исправляет проблему запуска игры в полном экране, лаги при проигрывании сюжетных роликов, а также позволяет следить за счетчиком FPS прямо во время игрового процесса. Очень полезно для анализа производительности.
Как вариант некоторые советуют исправить значение [Textures.Cache] файла dxgi.ini на такие:
[Textures.Cache]
И изменить TargetFPS с 59.93998 на 29.93998, тем самым ограничив себе FPS до 30. Файл dxgi.ini появится после запуска игры с FAR.
Если возникнут какие-то проблемы или игра перестанет запускаться, нужно лишь удалить все файлы и каталоги мода в папке Nier: Automata, зайти в игру и поставить все настройки по умолчанию.
Данная версия моду не содержит анти-пиратских предохранителей. Все права на мод принадлежат Kaldaien.
Far мод для nier automata
В игре используется тяжелое глобальное освещение, которое даже на минимальных настройках графики заставляет вашу видеокарту потеть как проклятую, ведь не зря в рекомендованных у игры стоит GTX 770 на 2GB видеопамяти.
Проделав все шаги, как сказано в данном руководстве вы повысите свой FPS до играбельного значения даже на самых древних/ноутбучных видеокартах.
Лично у меня имеется ноутбук со следующими характеристиками:
ps. И хочу добавить, что моя видеокарта не на 2GB, а на 1GB.
Что мы имеем? Слабый компьютер/ноутбук с поддержкой DirectX11(обязательно), свободное время и кучу терпения, ведь мы хотим играть хотя-бы с минимальными FPS?
Раз мы хотим прибавку FPS, тогда для начала почистите свой компьютер от не нужных программ и прочего хлама, который лишь весит в фоновых процессах и нагружает ваш и без того не супер топовый ПК, гайдов в интернете полно. От себя лишь добавлю: Не устанавливайте никакие программы по увеличению FPS, по типу Razer Game Booster и прочего бреда, который лишь грузит ваш процессор на фоне, делайте все вручную, а также можете пользоваться Твиками, об этом чуть попозже.
Для адекватной работы игры, дабы она у вас не вылетала во время кат-сцен и в прочих местах, вам нужно иметь свежую сборку Windows.
Бегите обновлять свою винду, качайте и устанавливайте все обновления, ведь я сам лично наблюдал следующую проблему: Игра вылетала на сборке Windows 8,1 2013-го года, а почему? Потому-что в ней не было нужных dll библиотек.
В идеале ставьте Windows 10, самый свежий билд, край 2017 год.
Но, но, но! Не спишите меня закидывать камнями по поводу десятки. В ней есть куча плюшек, да и вообще, лучше всего ставить LTSB версию, но это уже для более прошаренных пользователей, ведь легче всего обновиться через центр обновлений Windows.
И так! Вы проследовали всем советам и обновили свою Винду до последнего билда, или хотя-бы не версии 13-го года и раньше. ( Владельцев пиратских семёрок тоже касается, как бы вы не любили свою систему, она уже банально устарела )
Теперь мы приступаем к самому сладкому, а именно: Настройка Windows, убираем все не нужные службы, слежку и прочую фигню, которая только грузит ваш диск и процессор на 100 процентов, а также приступаем к моддингу игры посредством установки конфигов.
Писать можно очень долго, да и не вам было бы лень читать, по этому собрал для вас самые лучшие гайды по моему субъективному мнению по оптимизации Windows
Far мод для nier automata
NieR:Automata™
As title ^
I’m sure that it can be found somewhere, or I can take an educated guess deleting it would simply do the job.
However, I can’t find any clear instructions for it very quickly, so I’m hoping one of my fellow gamers can tell me!
Thanks in advance :X
If you’ve ONLY installed FAR (meaning you haven’t installed the global injector or anything else through SKIM) then you only need to remove files until your game folder looks like this: http://i.imgur.com/GLwSGut.png
Well I’ve used the auto installer, which was called SKIM I think, so I probably installed the other stuff too. I haven’t delved into the entire modding thing, so honestly I have no clue what global injector is.
Cheers for help though 😀
Jeez, people are so stupid. It’s not even funny anymore. You idiots don’t even know what you are installing.
If you’ve ONLY installed FAR (meaning you haven’t installed the global injector or anything else through SKIM) then you only need to remove files until your game folder looks like this: http://i.imgur.com/GLwSGut.png
Well I’ve used the auto installer, which was called SKIM I think, so I probably installed the other stuff too. I haven’t delved into the entire modding thing, so honestly I have no clue what global injector is.
Cheers for help though 😀
Well I’ve used the auto installer, which was called SKIM I think, so I probably installed the other stuff too. I haven’t delved into the entire modding thing, so honestly I have no clue what global injector is.
Cheers for help though 😀
It all depends on what product [i.imgur.com] you selected in SKIM64.exe. If you didn’t manually change the product to «Special K (Global Injector)» that was at the very bottom of the list then you haven’t installed the global injector.
It all depends on what product [i.imgur.com] you selected in SKIM64.exe. If you didn’t manually change the product to «Special K (Global Injector)» that was at the very bottom of the list then you haven’t installed the global injector.
Ah yea I remember seeing that, I did not change anything and left it on the default value. Thanks 🙂 Just out of curiosity, what good would installing that have done?
Well. if you’re on Win10 Creators Update. crashed your system. Like, A TON. Even the login screen would break and not work after a restart, forcing you to boot into Safe Mode.
If you’re on Windows 7. well, it wouldn’t crash your system. Just not work.
For Win7 + Win10 Creators Update there’s a whole new injector that works, but it’s still in its early stages.
Ah yea I remember seeing that, I did not change anything and left it on the default value. Thanks 🙂 Just out of curiosity, what good would installing that have done?
Well. if you’re on Win10 Creators Update. crashed your system. Like, A TON. Even the login screen would break and not work after a restart, forcing you to boot into Safe Mode.
If you’re on Windows 7. well, it wouldn’t crash your system. Just not work.
For Win7 + Win10 Creators Update there’s a whole new injector that works, but it’s still in its early stages.