Обновление Minecraft 1.13 снапшот 18w05a
Мы только что, на этой неделе переехали в новый офис, поэтому в новом снапшоте нет ничего, что можно было бы показать. Но у нас всё равно есть снапшот! В нём исправлено несколько ошибок, что не может не радовать.
Что нового в Minecraft 1.13, снапшот 18w05a
Исправления ошибок
Команда /bossbar
Эта команда позволяет создавать произвольный индикатор состояния здоровья босса (боссбар), изменять его внешний вид и указывать кому его отображать.
А потом можно изменить его внешний вид при помощи команд:
— задать тех, кто может видеть босс-бар, например @a ; по умолчанию — none
Боссбары сохраняются при перезапусках игры и перемещении между мирами. Если игрок добавлен к боссбару, то при повторном входе он снова будет добавлен к нему. Пока это не будет переопределено командой.
Установка снапшота
Пожалуйста сообщайте о любых найденных в Майнкрафте ошибках на bugs.mojang.com. Если нам никто о них не расскажет, то мы их и исправить не сможем!
Чтобы получить обновленную версию, открой лаунчер и нажмите кнопку «New Profile». Назовите новый профиль «snapshots», поставьте галочку в поле «Enable experimental development snapshots» и сохраните. Чтобы переключиться в нормальную версию, Вы можете выбрать её в выпадающем списке в нижнем левом углу лаунчера. Создавайте резервные копии, перед запуском снапшота или запускайте игру в другой директории (см. опции в окне «new profile»).
Снапшоты могут сломать Ваш мир и сделать Вам больно! Создавайте резервные копии и/или запускайте игру в директории отличной от Вашего основного мира.
На ошибки жаловаться сюда:
Натан Адамс, 31.01.2017
We just moved into a new office this week, so we don’t have very much to show you in a new snapshot.
How to Use the Bossbar Command in Minecraft
This Minecraft tutorial explains how to use the /bossbar command with screenshots and step-by-step instructions.
You can use the /bossbar command to add, configure or remove a custom bossbar in Minecraft. Let’s explore how to use this cheat (game command).
Supported Platforms
The /bossbar command is available in the following versions of Minecraft:
| Platform | Supported (Version*) |
|---|---|
 Java Edition (PC/Mac) | Yes (1.13) |
 Pocket Edition (PE) | No |
 Xbox 360 | No |
 Xbox One | No |
 PS3 | No |
 PS4 | No |
 Wii U | No |
 Nintendo Switch | No |
 Windows 10 Edition | No |
 Education Edition | No |
* The version that it was added or removed, if applicable.
NOTE: Pocket Edition (PE), Xbox One, PS4, Nintendo Switch, and Windows 10 Edition are now called Bedrock Edition. We will continue to show them individually for version history.
Requirements
To run game commands in Minecraft, you have to turn cheats on in your world.
Bossbar Command
Bossbar Command in Minecraft Java Edition (PC/Mac)
In Minecraft Java Edition (PC/Mac), there are different syntaxes depending on what you would like to do with the bossbar.
To set the text color of the bossbar (default is white):
To set the maximum value of the bossbar (default is 100):
To change the text that appears above the bossbar:
To specify which players can see the bossbar (by default, no players can see the bossbar):
To set the style of the bossbar:
To set the current value of the bossbar:
To set whether the bossbar is visible (default is true):
To list all bossbars:
To remove a bossbar:
To get an attribute of the bossbar:
Definitions
Examples
Example in Java Edition (PC/Mac)
To create a bossbar called digminecraft:bossbar1 with the text «TheChallenge»:
To show the bossbar called digminecraft:bossbar1 to all players:
To set the current value of the bossbar called digminecraft:bossbar1 to 100:
To change the color of the bossbar called digminecraft:bossbar1 to yellow:
To list all bossbars:
To get the current value of the bossbar called digminecraft:bossbar1 :
To remove the bossbar called digminecraft:bossbar1 :
How to Enter the Command
1. Open the Chat Window
The easiest way to run a command in Minecraft is within the chat window. The game control to open the chat window depends on the version of Minecraft:
2. Type the Command
We will cover examples of how to create a bossbar, show the bossbar to players, set the current value of the bossbar, and change the color of the bossbar.
Create a Bossbar
Let’s start by showing how to create a new bossbar that has an ID of digminecraft:bossbar1 and «TheChallenge» as the text that appears above the bossbar with the following command:
Type the command in the chat window. As you are typing, you will see the command appear in the lower left corner of the game window. Press the Enter key to run the command.
Once the command has been entered, the bossbar will be created but it won’t yet be visible on the screen. By default, no players have been set up to see the bossbar.
Show the Bossbar to Players
Next, let’s update the settings for the bossbar so that the bossbar shows at the top of the game window for all players. We can show the bossbar called digminecraft:bossbar1 to all players with the following command:
Type the command and press the Enter key to run the command.
Once the command has been entered, you will see the new bossbar appear at the top of the screen. By default, the color of the bossbar is white, the current value of the bossbar is 0, and the max value of the bossbar is 100.
Set the Current Value of the Bossbar
Now, let’s set the current value of the boss bar to 100 (so that the progress bar is full) with the following command:
Type the command and press the Enter key to run the command.
Once the command has been entered, you should see a full progress bar in white since now the current value for the bossbar is set to 100 and the maximum value for this bossbar is 100.
Change the Color of the Bossbar
Next, let’s change the color of the bossbar to a different color instead of white. You can change the bossbar to blue, green, pink, purple, red, white or yellow.
Let’s change the bossbar to yellow with the following command:
Type the command and press the Enter key to run the command.
Once the command has been entered, you should see both the bossbar’s text and the progress bar appear in yellow.
Congratulations, you just learned how to use the /bossbar command in Minecraft!
Other Game Commands
You can use other commands and cheats in Minecraft such as:
how to make bossbar to any specific minecraft mob in 1.13.1 minecraft version
2 replies
You’ll need a series of commands, but it can be done a bit easier than you showed. First some blatant self promotion: I wrote a blog about bossbars not too long ago, maybe a good read?
There is no «one» command for all mobs because mobs have different health values and if you want your bossbar to match that value exactly you’d have to tune it. Otherwise your bar will either display too little (already emptied a bit) or too much (players start fighting and the bar won’t lower for a while).
Step one: determine the mobs max health. For example when checking a horse:
/data get entity @e[type=minecraft:horse,limit=1] Health
This shows me that a (healthy) horse has 25 health maximum.
Create the bossbar:
/bossbar add mob «Mobs health»
Set the maximum value to 25, so that it matches the horse:
/bossbar set minecraft:mob max 25
Now you’re ready to check a horse. I would suggest to rely on tags, that makes it easier to pinpoint a specific horse which you want to check up on.
First you’ll need a repeating command block which adds the mobs health into the bossbar, but only if that mob actually exists. Because I’m using tags I can use this
/execute if entity @e[tag=boss] store result bossbar minecraft:mob value run data get entity @e[tag=boss,limit=1]
So this would only run if there actually is an entity out there which is tagged as boss. When so it’ll check its health and dump that into the bossbar. This makes the bossbar somewhat usable in a generic way.
Next step: making the bar visible to players. I’d suggest a range of 20 blocks around the mob?
Anyway, that can be done by adding a chain command block to the previously repeating command block. I’d set it to conditional though:
/execute at @e[tag=boss] run bossbar set minecraft:mob players @p[distance=..20]
So this would make the bossbar visible to all players who are within a 20 block radius around the mob.
And that should do it, hope this can still help.
(edit) Forgot to mention; you can activate this setup by actually tagging a mob. So, for example, to tag a horse next to me as boss I’d use something like:
/tag @e[type=minecraft:horse,distance=..5,limit=1] add boss
Гайд по команде /bossbar
Гайд по КБ #3 Команда /bossbar!Подробнее
БОССБАР МАШИНА! (Небольшой гайд по команде боссбар)Подробнее
Команда /team 1.13+ | Цветной ник | Невидимый ник | Дружелюбные монстры | Гайд для 1.14, 1.15, 1.16Подробнее
Как создать свой боссбар в Minecraft Java + хорошая новость в описанииПодробнее
Как сделать таймер на боссбаре 1.16.2Подробнее
Гайд По Команде /item | Майнкрафт 1.17+Подробнее
МАЙНКРАФТ КОМАНДЫ #2 /bossbar // КАМАНДА BOSSBAR // МАЙНКРАФТ ТУТОРИАЛПодробнее
Гайд по команде /team (полный) (Minecraft 1.14.3)Подробнее
Команда Minecraft Bossbar полностью объяснена! [1.15.2] (Учебное пособие)Подробнее
ПРОСТЕЙШИЙ ТАЙМЕР НА КОМАНДНЫХ БЛОКАХПодробнее
УПРАВЛЯЙ ЧЕМ УГОДНО ВЗГЛЯДОМ! | КОМАНДАПодробнее
Как использовать команду /dialogue? | Команды Minecraft Bedrock EditionПодробнее
Атрибут и где его можно использоватьПодробнее