skyrim моды immersive hud ihud
Настраиваемый игровой HUD / Immersive HUD-iHUD
iHUD добавляет возможность изменять внутри игровой интерфейс, компаса, индикаторов, прицела с настройками. В результате iHUD делает элементы интерфейса видимыми когда они нужны и скрывает их когда вы не нуждаетесь в этом.
Обновление:3.0.03 (фикс перевода)
* Сам мод не обновлялся автором, просто я как локализатор сделал откат перевода трех категорий в меню настроек в МСМ «Активация», «Опции» и «Прозрачность» обратно на английский, так как при переводе на русский, ломалось отображение всех остальных опций справа в окне настроек и в этих окнах была пустота. В итоге на английском будут только названиях трех категорий в левой стороне настроек мода.
Обновление:3.0.03
— Исправлена ошибка допущенная в версии 3.0.02, когда индикаторы активных эффектов не скрывались
Обновление:3.0.02
— Исправлено несколько ошибок, которые являлись причиной добавления ошибочных записей в журнал папируса (Papyrus logs)
Журнал изменений:
— Мод вышел из бета стадии и это полный и финальный релиз
— Исправлены и удалены отладочные отчетности в виде уведомлений и для лучше работы мода
— Исправлена ошибка, когда в МСМ меню, опция «Включение индикатора здоровья врага» не запоминалась после перезагрузки игры и сохранения
— Данная версия пока в стадии beta, но она полностью рабочая, сомнений нет, просто автор ждет отчеты тестирования и не более
— Добавлена поддержка для модов которые имеют свои собственные «виджеты», например для мода MoreHUD, iПотребности, SkyUI и так далее.
— В МСМ меню добавлены дополнительные опции «Активных эффектов», а так же опция «Связать все виджеты SkyUI» или сделать их отображение по отдельности
— Исправлена ошибка с быстро исчезающими бар-полосками на выносливость,магию и здоровье,теперь всё работает корректно и можно включить или отключить в любое время
— Исправлена ошибка с прозрачностью бар-полос для здоровья,выносливости и магии,теперь всё работает независимо от других выбранных параметров
— Мелкая корректировка перевода в МСМ меню
— Добавлены опции,чтобы скрыть или показать новые SkyUI виджеты (Активные заклинания,Эффекты и т.д.)
— Теперь перекрестье скрыто при открытии и чтении книги (работает в большинстве случаев)
— Теперь перекрестье скрыто во время фаталити и убийств
— Добавлен ползунок регулировки контроля обновления скрипта в меню SkyUI(в главном меню игры)-Не рекомендуется ставить меньше 0.1
— Теперь прицел (перекрестие) исчезает во время диалогов
— Исправлен индикатор (шкала) здоровья врагов
Требования:
Skyrim LE 1.9.32.0.8
SKSE 1.07.03
SkyUI 4.1 и выше
При обновлении с предыдущей версии до 3.0.03:
— Внимание. В ранней версии 2.4, если у кого то установлена эта версия, я забыл из архива удалить 2 файла iHUD.bak и iHUD.bsl, они для игры не нужны, если вы их установили то удалите из папки Data в вашей игре
— Ничего особенного делать не нужно, просто в МСМ отключите мод и установите новую версию и снова подключите мод в МСМ меню
Установка:
Поместить папку data из архива в папку с игрой, подтвердить слияние папок и файлов и активировать в лаунчере или менеджере модов.
Please log in or register
To enjoy the benefits of Nexus Mods, please log in or register a new account
File information
Last updated
Original upload
Created by
Uploaded by
Virus scan
Tags for this mod
About this mod
HUD when you need it. HIDE when you don’t.
Get the best of both worlds. The usefulness of having a HUD with the immersion of having none.
Off-site requirements
Mods requiring this file
Author’s instructions
File credits
This author has not credited anyone else in this file
Donation Points system
This mod is opted-in to receive Donation Points
Translations available on the Nexus
Version 0.2b
Version 0.1.0.1b
Straight donations accepted
What is iHUD?
The aim of iHUD is to provide the immersive feel you get from having no HUD, whilst keeping the usefulness of having one. It takes the permanantly visible HUD elements such as compass and crosshair, and hides them when not needed. Hence the motto:
HUD when you need. HIDE when you don’t.
Important
This mod is a beta test and will require SKSE64 that is currently in alpha test phase. Please understand that by testing SKSE64 at this stage you are using a tool that is currently unsupported by the devs and may have bugs/issues that could affect your game and even your save. But absolutely sure you are willing to take the risk before using SKSE64.
Important
This mod requires SKSE64.
Get updates on my mods/videos on my twitter channel.
What does it let you do?
1. Toggle the compass with the ‘x’ key. You can change this through the MCM settings or by going to console and typing ‘set iHUDKey to X’ where X is the numerical scancode for the key.
2. The crosshair is only visible when using a ranged weapon/staff or a spell, or when hovering over an activatable item.
3. Allows you to change the transparancy of the compass and crosshair seperately (see video).
4. Floating quest markers only visible when the compass is visible (see video).
5. Allow you to remove the sneak meter, but keep the crosshair when using bow, staff or spell (see video).
6. Speeds up how fast the magicka, health and stamina bars disappear once you regain 100%.
Installation
1. Click the Download with Manager button in the files section to download to NMM.
2. Activate the mod from the mods tab.
Or if you prefer to manually install, just download the file and extract the files into the data folder. Make sure you check the iHUD.esp in you load order.
Makes sure you have SKSE64 installed.
Updating from a previous version
1) Deactivate the previous version
2) Activate the new version. Simple as that.
Un-Installation
1. Deactivate the mod in NMM.
2. If you load your game and the compass is not visible, close the game and open up the SkyrimPrefs.ini file and make sure bShowCompass is set to 1.
Credits
This mod would not be possible without the help and work of the SkyUI modding community, especially Schlangster, Kratos and Mardoxx.
Also credit to the SKSE64 team for making SKSE64.
Please log in or register
To enjoy the benefits of Nexus Mods, please log in or register a new account
File information
Last updated
Original upload
Created by
Uploaded by
Virus scan
Tags for this mod
About this mod
HUD when you need it. HIDE when you don’t.
Get the best of both worlds. The usefulness of having a HUD with the immersion of having none.
Off-site requirements
Mods requiring this file
Author’s instructions
File credits
This author has not credited anyone else in this file
Donation Points system
This mod is opted-in to receive Donation Points
Translations available on the Nexus
Version 0.2b
Version 0.1.0.1b
Straight donations accepted
What is iHUD?
The aim of iHUD is to provide the immersive feel you get from having no HUD, whilst keeping the usefulness of having one. It takes the permanantly visible HUD elements such as compass and crosshair, and hides them when not needed. Hence the motto:
HUD when you need. HIDE when you don’t.
Important
This mod is a beta test and will require SKSE64 that is currently in alpha test phase. Please understand that by testing SKSE64 at this stage you are using a tool that is currently unsupported by the devs and may have bugs/issues that could affect your game and even your save. But absolutely sure you are willing to take the risk before using SKSE64.
Important
This mod requires SKSE64.
Get updates on my mods/videos on my twitter channel.
What does it let you do?
1. Toggle the compass with the ‘x’ key. You can change this through the MCM settings or by going to console and typing ‘set iHUDKey to X’ where X is the numerical scancode for the key.
2. The crosshair is only visible when using a ranged weapon/staff or a spell, or when hovering over an activatable item.
3. Allows you to change the transparancy of the compass and crosshair seperately (see video).
4. Floating quest markers only visible when the compass is visible (see video).
5. Allow you to remove the sneak meter, but keep the crosshair when using bow, staff or spell (see video).
6. Speeds up how fast the magicka, health and stamina bars disappear once you regain 100%.
Installation
1. Click the Download with Manager button in the files section to download to NMM.
2. Activate the mod from the mods tab.
Or if you prefer to manually install, just download the file and extract the files into the data folder. Make sure you check the iHUD.esp in you load order.
Makes sure you have SKSE64 installed.
Updating from a previous version
1) Deactivate the previous version
2) Activate the new version. Simple as that.
Un-Installation
1. Deactivate the mod in NMM.
2. If you load your game and the compass is not visible, close the game and open up the SkyrimPrefs.ini file and make sure bShowCompass is set to 1.
Credits
This mod would not be possible without the help and work of the SkyUI modding community, especially Schlangster, Kratos and Mardoxx.
Also credit to the SKSE64 team for making SKSE64.